This is a rough “map” of the tuneboss app’s pages and functionality.
There’s quite a lot of depth to the app and hopefully this will help you locate a specific feature or setting.
I’ll try to add links to the pages with info about particular sections, but this is all being done by hand so may be a little patchy.
- App home screen (in more detail)
- Settings screen [SWIPE LEFT or tap “Settings”]
- Remember password when connecting
- Auto-connect to my Tuneboss
- Record Datalog file when using dashboard
- Show tutorial again
- Set preferred language
- Tuning screen [SWIPE RIGHT or tap “Tuning”]
- Basic adjustment (fuel & spark table with less cells for manual tuning)
- Pro adjustment (fuel & spark table with more cells for dyno/staytuned tuning)
- AFR target adjustment (requires StayTuned & wideband O2 sensor)
- Injection angle (on gen3 and maybe others)
- Dual injector [not tested yet]
- Download map (download a map from the Tuneboss repository)
- Load map (from on your phone/device)
- Backup current map (to your current phone/device)
- Config screen [SWIPE RIGHT AGAIN or tap “Config”]
- Set RPM limit
- Set Shift-light activation RPM
- Set Radiator fan activation temp
- Mode switch [do not use]
- Mode switch 2.0 [do not use]
- Shiftboss (requires quickshift unit) [not tested yet)
- Launchboss [not tested yet]
- Rumble & Antilag [not tested yet]
- Meter (speedometer) calibration
- Staytuned (wideband auto-tuning parameters, requires wideband sensor)
- O2 sensor settings (requires wideband sensor)
- VVA activation settings (gen3 only)
- Aux control [not tested yet]
- Safe mode [not tested yet]
- Error logging
- TPS acceleration (like accel pump)
- Speed compensation (trim fuel based on speed)
- Engine temperature (compensation & cold start enrichment)
- View datalogs [tap “trips” on Home screen]
- Meter mode [button top right on Home screen]
